Top

SuperBlade Servers

SuperBlade® offers many unique advantages that differentiate it from competitors' blade products and traditional rack-mount solutions. Customer benefits include maximum density, affordability, reduced management costs, lower power consumption, optimal ROI, and high scalability - and in most applications, blade servers would reduce system acquisition costs. The SuperBlade® family enables full optimization for a wide array of mission-critical and compute-intensive applications. SuperBlade® revolutionizes modular computing architecture by offering several advanced application-optimized models such as Enterprise Blade Server, Data Center Optimized Blade, Workstation Blade and Office Blade.

With SuperBlade® servers, you can help preserve not only our green planet, but keep red ink off your books with green cash savings. A SuperBlade server can save more than 100 watts over a traditional discrete 1U rack-mount server. These savings add up quickly when your SuperBlade chassis is fully populated with 10 servers. By eliminating the overhead in 1U discrete servers and using the high efficiency (up to 94%) power supplies, SuperBlade can save you more than $1,000 per year in power for your servers and even more when you add the reduced cooling costs. At the same time, you will reduce your carbon dioxide emissions by over 5.5 metric tons, the equivalent of planting 1.7 acres of trees.

Enclosures

SuperBlades

Space Optimization

Housed within a 19" industry-standard rack, SuperBlade® servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space. Up to 10 TwinBlade (20 nodes) can be installed in a 7U chassis. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the SuperBlade provides more than 50% density savings with 120 nodes and 24 switches in a 42U rack..

 

Cable Reduction

The SuperBlade® server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers. Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.

SuperBlade Enclosure 720F

Key Features

 

  1. Up to 10 hot-plug Twin processor blades
  2. Supports Intel based Twinblade®
  3. Supports Intel and AMD based 10-blade
  4. Power LED, Fault LED
  5. Supports up to two hot-plug IB FDR/QDR switches
  6. Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switches Modules
  7. Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  8. Up to four hot-swap 3000W power supplies, N+1 redundant
  9. Up to 16 cooling fans

SuperBlade Enclosure 720D

Key Features

 

  1. Up to 10 hot-plug Twin processor blades
  2. Supports Intel based Twinblade®
  3. Supports Intel and AMD based 10-blade
  4. Power LED, Fault LED
  5. Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switches/ Gigabit Ethernet Pass-Through Modules
  6. Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  7. Up to four hot-swap 2500W power supplies, N+1 redundant
  8. Up to 16 cooling fans

SuperBlade Enclosure 720E

Key Features

 

  1. Up to 10 hot-plug Twin processor blades
  2. Supports Intel based Twinblade®
  3. Supports Intel and AMD based 10-blade
  4. Power LED, Fault LED
  5. Supports up to two hot-plug IB QDR switches
  6. Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switch modules
  7. Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  8. Up to four hot-swap 2500W / 3000W power supplies, N+1 redundant
  9. Up to 16 cooling fans

SuperBlade Enclosure 710Q

Key Features

 

  1. Up to 10 hot-plug processor blades
  2. Supports both Intel and AMD based blades
  3. Power LED, Fault LED
  4. Supports up to two hot-plug QDR IB switches
  5. Supports up to two hot-plug Gigabit Ethernet switches / Pass-Through Modules
  6. Up to two hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  7. Up to four hot-swap 1620W / 2500W / 3000W power supplies, N+1 redundant
  8. Up to 16 cooling fans

SuperBlade Enclosure 710E

Key Features

 

  1. Up to 10 hot-plug processor blades
  2. Supports both Intel and AMD based blades
  3. Power LED, Fault LED
  4. Supports one hot-plug DDR IB switch
  5. Supports up to two hot-plug Gigabit Ethernet switches / Pass-Through Modules
  6. Up to two hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  7. Up to four hot-swap 1620W / 2500W power supplies, N+1 redundant
  8. Up to 16 cooling fans

SuperBlade Enclosure 714Q

Key Features

 

  1. Up to 14 hot-plug processor blades
  2. Supports Intel based blades
  3. Power LED, Fault LED
  4. Support up to two hot-plug QDR IB switches
  5. Supports up to four hot-plug Gigabit Ethernet switches
  6. Up to two hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  7. Up to four hot-swap 1620W / 2500W power supplies, N+1 redundant
  8. Up to 16 cooling fans

SuperBlade Enclosure 714E

Key Features

 

  1. Up to 14 hot-plug processor blades
  2. Supports Intel based blades
  3. Power LED, Fault LED
  4. Supports one hot-plug DDR IB switch
  5. Supports up to two hot-plug Gigabit Ethernet switches / Pass-Through Modules
  6. Up to 2 hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
  7. Up to four hot-swap 1400W / 1620W power supplies, N+1 redundant
  8. Up to 8 cooling fans

SuperBlade Enclosure 714D

Key Features

 

  1. Up to 14 hot-plug processor blades
  2. Supports Intel based blades
  3. Power LED, Fault LED
  4. Supports up to one hot-plug Gigabit Ethernet switch / Pass-Through Module
  5. One hot-plug management module providing remote KVM and IPMI 2.0 functionalities
  6. Up to four hot-swap 1400W / 1620W power supplies, N+1 redundant
  7. Up to 8 cooling fans

TwinBlade®

GPU/Xeon Phi™ Blade

NVMe Blade

StorageBlade

DatacenterBlade®

AMD Blade

Key Features

 

Two nodes in a TwinBlade. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  2. Intel® C612 Express chipset
  3. Up to 512GB reg. ECC LRDIMM
  4. Intel® i350 Dual port Gigabit Ethernet
  5. 2x 2.5" Hot-Plug SATA3 Drive Trays
  6. Integrated Aspeed AST 2400 Graphics
  7. Integrated IPMI2.0 w/ remote KVM and virtual media
  8. Dual-port FDR InfiniBand onboard

SuperBlade 7228R-T2F2

Key Features

 

Two nodes in a TwinBlade. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  2. Intel® C612 Express chipset
  3. Up to 512GB reg. ECC LRDIMM
  4. Intel® i350 Dual port Gigabit Ethernet
  5. 2x 2.5" Hot-Plug SATA3 Drive Trays
  6. Integrated Aspeed AST 2400 Graphics
  7. Integrated IPMI2.0 w/ remote KVM and virtual media
  8. FDR InfiniBand onboard

SuperBlade 7228R-T2F

Key Features

 

Two nodes in a TwinBlade. Each node supports the following:

  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  2. Intel® C612 Express chipset
  3. Up to 512GB reg. ECC LRDIMM
  4. Intel® i350 Dual port Gigabit Ethernet
  5. 2x 2.5" Hot-Plug SATA3 Drive Trays
  6. Integrated Aspeed AST 2400 Graphics
  7. Integrated IPMI2.0 w/ remote KVM and virtual media
  8. 10GbE onboard

SuperBlade 7228R-T2X

Key Features

 

  1. 120 CPUs (+120 GPUs/Xeon Phi/ Kepler) per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. 1x SSD or 2x SATA-DOM supported
  5. Up to 1TB ECC RDIMM or LRDIMM; 8x DIMM slots
  6. 2x 10GbE ports onboard
  7. IPMI 2.0, KVM over IP, Virtual Media over LAN

SuperBlade 7128RG-X

Key Features

 

  1. 120 CPUs (+120 GPUs/Xeon Phi/ Kepler) per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. 1x SSD or 2x SATA-DOM supported
  5. Up to 1TB ECC RDIMM or LRDIMM; 8x DIMM slots
  6. Intel® i350 Dual port Gigabit Ethernet
  7. Single FDR InfiniBand onboard
  8. IPMI 2.0, KVM over IP, Virtual Media over LAN

SuperBlade 7128RG-F

Key Features

 

  1. 120 CPUs (+120 GPUs/Xeon Phi/ Kepler) per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. 1x SSD or 2x SATA-DOM supported
  5. Up to 1TB ECC RDIMM or LRDIMM; 8x DIMM slots
  6. Intel® i350 Dual port Gigabit Ethernet
  7. Dual FDR InfiniBand onboard
  8. IPMI 2.0, KVM over IP, Virtual Media over LAN

SuperBlade 7128RG-F2

Key Features

 

  1. 120 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 1TB LRDIMM, 512GB RDIMM; 16 DIMM slots
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. FDR-10/QDR InfiniBand or 10GbE mezzanine HCA
  8. 6x 2.5" Hot-swap HDD/SSD Bays; 3x Hybrid ports support Hot-plug NVMe/SAS HDD
  9. LSI 3108, HW RAID 0,1,5,50,6 support
  10. Graphics: Aspeed AST2400 BMC

SuperBlade 7128R-C6N

Key Features

 

  1. 168 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 512GB VLP ECC RDIMM; 16 DIMM
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. FDR-10/QDR InfiniBand or 10GbE mezzanine HCA
  8. 3x 2.5" Hot-swap HDD/SSD Bays; 3x Hybrid ports support Hot-plug NVMe/SAS HDD
  9. SAS3 via LSI 3108; HW RAID 0, 1, 5
  10. Graphics: Aspeed AST2400 BMC

SuperBlade 7428R-C3N

Key Features

 

  1. 168 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 512GB VLP ECC RDIMM; 16 DIMM
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. 3x 2.5" Hot-swap HDD/SSD Bays; 3x Hybrid ports support Hot-plug NVMe/SAS HDD
  8. Graphics: Aspeed AST2400 BMC

SuperBlade 7428R-T3N

Key Features

 

  1. 120 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 1TB LRDIMM, 512GB RDIMM; 16 DIMM slots
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. FDR-10/QDR InfiniBand or 10GbE mezzanine HCA
  8. 6x 2.5" Hot-swap HDD/SSD Bays
  9. LSI 3108, HW RAID 0,1,5,50,6 support
  10. Graphics: Aspeed AST2400 BMC

SuperBlade 7128R-C6

Key Features

 

  1. 168 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 512GB VLP ECC RDIMM; 16 DIMM
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. FDR-10/QDR InfiniBand or 10GbE mezzanine HCA
  8. 3x 2.5" Hot-swap HDD/SSD Bays
  9. SAS3 via LSI 3108; HW RAID 0, 1, 5
  10. Graphics: Aspeed AST2400 BMC

SuperBlade 7428R-C3

Key Features

 

  1. 168 CPUs per 42U Rack
  2. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
  3. Intel® C612 Express chipset
  4. Up to 512GB ECC VLP RDIMM; 16 DIMM
  5. Intel® i350 Dual port Gigabit Ethernet
  6. IPMI 2.0, KVM over IP, Virtual Media
  7. 3x 2.5" Hot-swap HDD/SSD Bays
  8. Graphics: Aspeed AST2400 BMC

SuperBlade 7428R-T3

Key Features

 

Two nodes in a Processor Blade. Each node supports the following:

  1. Dual AMD Opteron™ 6000 series processors (Socket G34)  16/12/8/4-Core ready; HT3.0 Link support
  2. AMD SR5650/SP5100 Chipset
  3. Up to 256GB DDR3 1600/1333/1066 MHz ECC Reg. DIMM in 8 DIMM slots
  4. Dual-Port Gigabit Ethernet
  5. 2 x 2.5" Hot-Plug SATA Drive Trays
  6. Integrated IPMI2.0 w/ remote KVM and virtual media
  7. Mellanox ConnectX FDR-10/QDR InfiniBand 40Gbps or 10GbE support (Optional)

SuperBlade 7222G-T2

Key Features

 

  1. Four AMD Opteron™ 6000 series processors (Socket G34)  16/12/8/4-Core ready; HT3.0 Link support
  2. AMD SR5650/SP5100 Chipset
  3. Up to 512GB DDR3 1600/1333/1066MHz ECC Registered DIMM in 16 DIMM slots
  4. Dual-Port Gigabit Ethernet
  5. 4x 2.5" Hot-Plug SATA Drive Trays
  6. Integrated IPMI2.0 w/ remote KVM and virtual media
  7. Mellanox ConnectX QDR InfiniBand 40Gbps or 10GbE support (Optional) Requires SBE-720E Enclosure

SuperBlade 7142G-T4

client reviews

find us

4921 Legends Dr

Lawrence, KS 66049

(785) 841-9559

sales@atipa.com

Q Security

Clearance

Engineers

Schedule #35F-0439P

Copyright© 2001-2017 Microtech Computers Inc.

All rights reserved.

Atipa Technologies, a division of Microtech Computers, Inc., is not responsible for typographical or photographic errors. Designated trademarks and brands are the property of their respective owners.