Dedicated SATA-based iSCSI storage appliance provides cost-effective, high-performance, highly reliable RAID storage for mission-critical application servers or back-up servers

The Adaptec 730i is compatible with Windows, Linux and VMware, delivering easy-to-manage storage that can be flexibly allocated via an IP SAN to application servers such as Microsoft Exchange, SQL Server and Oracle while they are up and running.

The 730i supports SATA drives in capacities from 3TB to 36TB. Boot diskless servers from the 730i over the IP SAN. For Windows servers, HA mirror between two 700i series storage appliances, and benefit from top-class VSS hardware snapshots.

• Cost-effective iSCSI storage appliances
• SAS and SATA expansion, scalable from 1TB to 33TB
• High performance, up to 368MB/s throughput
• Easy to manage with Adaptec Storage Manager
• Easy management and cross-platform file-sharing out of the box

Cross-Platform Support	Ideal for Use with Windows, Linux and VMware Thoroughly tested with primary operating systems Boot Diskless servers from the IP SAN Microsoft-specific functionality VDS provider for easy management Simple SAN Component VSS hardware transportable snapshots Supports Microsoft Clusters MPIO for path resiliency HA mirroring with failover/failback
Processor	AMD Opteron processor, with 1MB L2 cache and 1000MHz HyperTransportTM
ECC Memory	2GB DDR 1 400 ECC RAM standard
Standard LCD Display	Backlit, 2-line, 16-character with system ID, IP address
Mounting	Custom 19" rackmount slide rails included
Network Transport Protocols	iSCSI software initiator support Compatible with Linux iSCSI initiator, 32- and 64-bit Compatible with VMware ESX iSCSI initiator Compatible with Microsoft's iSCSI initiator, 32- and 64-bit iSCSI hardware initiator support Q-Logic QLA-4050C Q-Logic QLA-4052C
Network Security	CHAP Authentication (iSCSI target level) SRP (Provides Secure Remote Password)
Data Protection	Hardware RAID 0, 1, 1E, 5, 6, 10, 50, 60 Integrated snapshot technology with Microsoft VSS support UPS Support for graceful shutdown
Power Rating	400W 100-240 VAC (autosensing) 50-60Hz
Input Current	3.4A peak for 115VAC, 1.7A peak for 230VAC
Power Consumption	390W peak
Heat Dissipation	1057 BTUs/hr

Storage with the right performance, reliability and price

The Adaptec SANbloc S50 JBOD is the simplest way to integrate the performance, reliability, and cost-effectiveness of Serial Attached SCSI (SAS) into your storage strategy. Whether you are creating or scaling your storage solution, the Adaptec S50 enables you to scale from 3.6GB to multiple terabytes of data capacity. Mix and match low-cost Serial ATA (SATA) and high-performance SAS drives to achieve the right balance of performance and cost.

The SANbloc S50 is perfect for data- and transaction-intensive applications. SAS host connections transfer terabytes of data at speeds up to 1200MB/s. Now, there's no need to choose between low cost or high performance!

• Mix and match SAS and SATA drives to balance performance, reliability and cost
• Meet growing data demands with 9TB of SATA storage or 3.6TB of SAS storage
• Point-to-point connectivity isolates drive failures, increasing reliability and performance
• Easily scale performance and capacity

Connectivity	One SAS I/O module supports two SAS connections One SAS port for host connection and the other SAS connection as expansion to additional SANbloc S50 expansion arrays. Each SAS connection supports up to 1,200MB/s
Disk Driver Interface	Twelve independent 300MB/s point-to-point connections to each SAS or SATA disk drive
Measured Performance	Up to 750MB/s (sustained reads)
I/O Module Features	Single controller Auto-negotiate speeds Inband and out-of-band management SMP and SSP command/protocol support Redundant cable support
Hot-Swap and Redundant Components	Two advanced power and cooling modules (APC) Two independent AC power inlets Up to 12 drives No active components on data path
Maximum SAS Cable Length	3m
Monitoring	Temperature, advanced power and cooling modules including fan speed control, disk drives, and I/O module, as well as error rates and quality of service on each SAS connection
Disk Drives	Capacity: Up to 750GB Rotational velocity: 7200 RPM, 10K RPM, 15K RPM Interface: 3Gb SAS; 3Gb/1.5Gb SATA II Form factor: 3.5in. form factor, 1.0in. height Supported drives: Only S50/Snap Server disk drives
AC Power	Input voltage: Autoranging, 85-264 VAC Input frequency: 47-63 Hz Power factor correction: Per EN61000-3-2 Input current: 100-240 VAC @ 4-2.5 A Output power: 491 W peak, 430 W average